Aggregate Testing Equipment

Product Details:

The machine is used for testing crushed slag, crushed and uncrushed gravel for resistance to abrasion. The aim of the test is to find the percentage wear due to the relative rubbing action between the aggregates and steel balls as abrasive charge. The oven-dried arrangements are weighted and rotated along with abrasive charge in the machine for the 500 or 1000 revolutions and percentage of wear so found out its reported as Los angeles abrasion value.

Specifications:

• Consists of a hollow steel cylinder, closed at both ends, having an inside diameter of 700mm and inside length of 500mm.
• The cylinder mounted on a sturdy frame on ball bearings.
• The opening is closed dust tight with a removable bolted cover in place.
• A detachable shelf which extends through the drum catches the abrasive charge and does not allow it to fall on the cover.
• The drum is rotated at a speed of 30-33 RPM by an electric motor through a heavy duty reduction gear.
• Fitted with revolution counter and push button starter.
• Supplied complete with a tray for collection of the material.
• Abrasive charge consists of set of 12 Nos. cast iron spheres or steel spheres (hardened steel balls) approximately 48mm diameter each weigh between 390-445 gram.
• Complete as above.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea / air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Aggregate Impact Value Test Apparatus is used for determining the aggregate impact value. The Sturdy Construction consists of a base and support columns to form a rigid framework around the quick release trigger mechanism to ensure an effective free fall of the hammer during test.

Specifications:

• The free fall can be adjusted through 380±5 mm
• Height of The Fall Hammer: 380+-5 mm
• Aggregate impact value test apparatus is supplied complete with a cylindrical measure of 75 mm dia x 50 mm depth

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

The selection of proper aggregate for a given application is essential to attain the desired quality. Various characteristics are required to be determined for the selection of appropriate aggregate from the wide range available. Aggregate Crushing Value Test Apparatus is used for measuring resistance of an aggregate to crushing.

Specifications:

• Cylindrical Cell: 120 mm internal dia x 150 to 120 mm height
• Plunger: 150 mm dia x 100 to 115 mm height
• Base Plate: 200 to 220 mm square x 7 mm thickness
• Tamping Rod: 15 mm dia x 450 to 600 mm length
• Metal Measure: 120 mm internal dia x 180 mm height

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea / air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

The water column type consists essentially of a stainless steel flanged cylindrical vessel with cover assembly, incorporating the measuring cylinder, pressure gauge and valves. Supplied complete with hand pump and calibration cylinder apparatus which is essential for adjustment to site barometric pressure. The cylindrical vessel of all models can also be used as unit weight measure for fresh concrete for density determination.

Specification:

• Capacity l: 5, 7, 8
• Air content range: 0-10%, 0-15%, 0-10%
• Graduations: 0.1%, 0.1% up to 6% and 0.2% from 6 to 8% and 0.5% from 8 to 15% 0.1% up to 8% and 0.5% over
• Weight approx.: kg 14,10,12

Additional Information:

• Item Code: DICTE148
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

Description:

• The tile sample is pressed under a specified load against a grinding path, strewn evenly with an abrasive power revolving at the rate of 30±1 revolutions per minute
• The wear of the tile is measured using a thickness gauge
• The abrasion testing machine consists of a replaceable grinding path fitted on a disc rotating about its vertical axis
• The rotating disc and the grinding path are enclosed by a circular tray
• A bracket holds the specimen
• The loading is by a counter balanced lever
• A funnel is provided to facilitate charging the grinding path with a brass sieve power
• Supplied complete with automatic pre-set revolution counter and one 7.5 kg weight but without abrasive power and thickness gauge
• Suitable for operation on 415 volts, 50 cycles, 3 phase A.C. supply, With dial gauge 0.01 x 25 mm laboratory
• In the manually operated unit, the gears are enclosed in a cast body
• The solvent may be introduced during tests through a cup on the housing cover

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

Our company is considered a trusted name in the market that engages in proffering Sieve Shaker that is vastly applauded for its great operating range. Made available in numerous specifications, the offered series is extensively demanded due to its lightweight, consistent performance and operational fluency. Test sieve shakers are lightweight and portable.

Specification:

• Operating Range: ≤ 325 mesh
• Vibration Frequency: 3000 times/min, 6000 times/min
• Set Time: 0∼60 min (selectable)
• Amplitude Selection: 0-3mm, continuous adjustment
• Vibration Mode: Fine Vibration; Intermittent Vibration; Continued Vibration
• Sieve Size: ∅ 200, ∅ 300
• Sieve Height: 50mm (9 sieves), 75mm (7 sieves)
• Weight: 20 kg
• Dimension (mm): 430×430×750
• Power Supply: AC220V, 50 Hz

Details:

• Uses Unique Vibratory Motion by using a Horizontal and Vertical sieving action to effectively separate materials
• The vibratory action produced by the power unit moves the sample all over the sieve in a unique way producing faster and more efficient
• sieving, while the rapid vertical movements also help to keep the apertures free from blocking
• Suitable for sieving High Density products and for Dry Sieving Analysis
• Unit is robustly built and can be used in Laboratories or At Site. It is Compact and Portable
• The instrument is fitted with a Special Clamping Device that ensures that the sieves are held firmly and allows them to be quickly removed and replaced

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea / air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

It consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. The scientific instrument has 14 nos. Chutes of 13 mm width and is complete with two receivers.

Specifications:

• Weight: 800
• Power: Hydraulic,0.75kW
• Voltage: 380v
• Material: Steel

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

The density of hardened concrete specimens such as cubes and cylinders can be quickly and accurately determined using a Buoyancy Balance. The apparatus consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance. Any type of Electronic Balance fitted with an under bench weighing facility can be fitted. The balance supplied can also be used as a standard weighing device, thus providing a versatile and comprehensive weighing system in the laboratory.

Specification:

• Overall dimensions: 510x510x1150 mm
• Weight approx.: 50 kg
• Accuracy: 1.2 g

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

We also provide a wide assortment of Cube Mould that is manufactured using premium grade raw material sourced from trusted vendors of the market. These products are offered at competitive prices and are in conformity with industry norms and standards. The Cube Mould is mainly used to determine the aggregate impact value.

Features:

• The height of fall can be adjusted
• The instrument consists of a circular base with two vertical guides
• The hammer is provided with a locking arrangement

Specification:

• Size: 70.6 mm x 70.6 mm x 70.6 mm
• Material: Iron
• Application: Industrial and Commercial Construction

Additional Information:

• Item Code: DICTE105
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By sea air basis
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy