Automotive Training Equipment

Product Details:

Automotive Engines Test Bed allows to carry out a vast selection of tests on petrol and Diesel engines, with a poweroutput of up 81 kW.The system includes a dynamometer with a control and instrumentation panel, a service unit with instruments for the measurementof air and fuel flow and a number of optional kits to make additional tests.The engines proposed with the testing bench are in widespread use and are supplied on an independent trolley mountedframe which can be easily connected to the dynamometer. Additional engines not listed in this catalogue can also besupplied on request. The system is supplied with manuals which describe all parts of the trainer, the installation and utilization procedures, as wellas many exercises with the relative results.

 

Product Details:

• Electrical power supply: 220 V AC single-phase, 50/60 Hz, 0.5 kW
• Three-phase, 50/60 Hz, 0.5 kW when using the optional auxiliary cooling unit
• Water supply: 5000 l/h - 3 bar
• Water discharge
• Exhaust gas outlet

Additional Information:

• Item Code: DITD0051
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

The device is designed based on the mechanical type CCS to holistically demonstrate the structure and operation of the system. The device applies to theoretical teaching and maintenance training of the CSS in secondary and senior vocational skill school, normal education and training institutions.

Specification:

• Size: 1600mmx700mmx1700mm
• External Power Supply: AC 220V 10% 50Hz
• Operating Voltage: 12v DC
• Operating Temprature: -40deg C to +50 Deg C

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Feature:

• Remotely lock and unlock your car
• Direction light flashing
• Remote car location
• Remote trunk release
• Window Output (-)
• Electronics and Penumatic door lock
• Universal for any cars

Specification:

• Main unit:
• Size: 8.5 x 6.3 x 2.8cm (L x W x H)
• Voltage: 12V±2V
• Static Current: <15mA
• Indicator current: 20mA
• Shock sensor current: <1mA
• Remote Control
• Size: 6 x 3.3 x 1cm (L x W x H)
• Voltage: 12V
• Current: 0mA
• Battery: 3-12V
• Frequency: 300-433.92MHz
• Coding: Learning code
• Code Time: >million

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

The Product The device is designed based on the Volkswagen electric window, central control door lock, and rearview mirror, to holistically demonstrate structures and operation of these systems. The device applies to theoretical teaching and maintenance training of the electric window, central control door lock, and rearview mirror in secondary and senior vocational skill schools, normal education and training institutions.

Features:

• Real and operable electric window, central control door lock, and rearview mirror are used to illustrate structures of these systems.
• Switches of the electric window, central control door lock, and rearview mirror can be operated to demonstrate operation of these systems.
• The training panel is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moisture proof.
• Its surface are processed by special craft and spraying primer.
• Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish.
• The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object.
• The training panel is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of circuit components of the electric window, central control door lock, and rearview mirror.
• The training panel's base frame is made of steel and the surface is paint-coated. Self-retention wheels are installed and a 24 0cm tabletop is fixed on the base frame to place materials and light testing devices.
• Instead of using accumulators and requiring charging, the training panel connects to a 220V AC voltage which changes to a 12V DC voltage through the internal circuit.
• The 12V DC voltage protects the training panel against short circuit
• Equipped with intelligent fault setting and appraisal system, include fault setting, troubleshooting and assessment functions etc

Specification:

• Size: 1600mm × 700mm × 1700mm (length x width x height)
• External power supply: A.C. 220V ± 10% 50Hz
• Operating voltage: 12V DC
• Operating temperature: -40??? to +50???

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

The device is designed based on the 1.6L exterior lighting system to holistically demonstrate the structure and operation of the system. The device applies to theoretical teaching and maintenance training of the lighting system in secondary and senior vocational skill schools, normal education and training institutions.

Features:

• A real and operable exterior lighting system is used to illustrate the structure of the system.
• Various lighting switches can be operated.
• In this way, the device demonstrates operation of the exterior lighting system.
• The training panel is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moistureproof.
• Its surface are processed by special craft and spraying primer.
• Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish.
• The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object.
• The training panel is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of circuit components of the exterior lighting system.
• The training panel's base frame is made of steel and the surface is paint-coated.
• Self-retention wheels are installed and a 24 0cm tabletop is fixed on the base frame to place materials and light testing devices.
• Instead of using accumulators and requiring charging, the training panel connects to a 220V AC voltage which changes to a 12V DC voltage through the internal circuit.
• The 12V DC voltage protects the training panel against short circuit.
• Equipped with intelligent fault setting and appraisal system, include fault setting, troubleshooting and assessment functions etc.

Specification:

• Size: 1600mm × 700mm × 1700mm (length x width x height)
• External power supply: A.C. 220V ± 10% 50Hz
• Operating voltage: 12V DC
• Operating temperature: -40??? to +50???

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

The Air Bag Systems Trainer utilizes real components to show the construction and operation details of air bag supplemental restraint systems. This system is ideal for informing students about the technology involved in these types of supplemental restraint systems. The Steering wheel unit has been carefully sectioned to show the internal layout and construction of a typical restraint unit.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

It's easy to explain the process, but being able to show other people how the THS recovers energy lost as heat in the brakes and uses it to supplement the power of its' fuel-burning engine. This is made easy with the Toyota Hybrid Cut-Away Trainer because it provides: Educationally functioning parallel-type hybrid system running a 1.5L gas engine and Nickel- Hydrogen motor powered by manual hand-crank.  Electric motors can be operated separately or simultaneously, according to teaching requirements. The cut-away model engine has been carefully sectioned for training purposes and professionally painted with different colors to better differentiate the various parts. There are over 2 dozen cutaway components.

Specifications:

• Driveshaft with bushes
• Nr 2 camshaft with timing shifter (VVT)
• 4 cylinders
• 4 valves per cylinder
• Connecting rod, piston, cooling engine air space, water pump
• Displacement: 1500 cc
• Timing belt
• Multipoints electronic injection with throttle
• Oil filter
• Exhaust collector with Lambda probe
• Flywheel
• Electric engine
• Epicyclical mixer
• DOHC overhead camshaft
• Generator
• Transmission belt
• Gears
• Roller chain
• Differential group

Technical Features:

• Type: Water Cooled Series, 4 Cylinders
• Valve: DOHC 16 Valves
• Gross Displacement: 1496 cc

Product Details:

Two main components form the basis of the test bed. First of all the welded steel baseplate complete with D.C. dynamometer, drive coupling and safety guard, spring type anti-vibration mountings, exhaust silencer, flexible pipe and provision for engine mountings. Secondly the framework/console which is positioned over the test bed carrying all instrumentation and controls, fuel system with flow measurement by burette, air flow measurement system, multi-point temperature indicator together with all the electrical circuits necessary for control of the dynamometer and engine.

Features:

• Full and part load performance
• Volumetric efficiency
• Fuel consumption mixture loops
• Air/Fuel ratio
• Frictional power losses
• Heat balance and energy studies

 

Other Details:

• Self-contained teaching facility
• Alternative engine types
• Comprehensive instrumentation
• Closed loop speed control
• Torque measurement by load cell
• Regenerative D.C. dynamometer

Additional Information:

• Item Code: DIETBE003
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

The test bed incorporates a robust mounting frame to which both the engine and dynamometer are fitted. The frame is fitted with wheels to allow the test bed to be easily moved. The engine is directly coupled to the dynamometer using an inertia matched drive shaft. All rotating parts are protected by fixed guards. The drive shaft guard is interlocked with the Emergency Stop circuit to prevent the engine from use when the guard is removed or open.

Product Details:

• Full and part load measurement of engine parameters to produce: Power and torque curves
• Fuel efficiency plots
• Brake mean effective pressure plots
• Volumetric efficiency plots
• Flow rate and temperature change for oil and coolant

Additional Information:

• Item Code: DIETBE004
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA AIR BASIS
• Delivery Time: 90-120DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

The device is designed based on the electric chair for the driver to holistically demonstrate the structure and operation of the electric chair with memory. The device applies to theoretical teaching and maintenance training of the electric chair in secondary and senior vocational skill schools, normal education and training institution.

Specification:

• Size: 1600mmx700mmx1700mm
• External Power Supply: AC 220V 10% 50Hz
• Operating Voltage: 12v DC
• Operating Temprature: -40deg C to +50 Deg C
• Rated power: 120w
• Rated rotation speed: 50Hz 90/1400rpm 60Hz 90/1500rpm
• Reduction ratio: 30

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

The training platform select automatic transmission assembly, with complete accessories, all parts are original parts, production quality management according to requirement of ISO9001: 2008 standards, different gear of DSG automatic transmission can be completed. Suitable for the automatic transmission construction and maintenance of schools and vocational technical training and senior automotive training institutions, practice teaching, can meet training project of electronically controlled automatic transmission structures, teaching theory, fault diagnosis, fault set and trouble shooting and assessment.

Features:

• Demonstrates DSG automatic transmission is working properly or not , experiments of the inverter to achieve gear lift of transmission at different input speeds
• LED to show the distribution of different gears dynamically
• With a combined instruments, display speed, vehicle speed, the main oil gallery change when gear lifting in different circumstances
• Judge the gear shift situation by the output speed by digital meter
• The training sets can control the output shaft by hydraulic brake system control
• The training sets are equipped with DSG automatic transmission system colored schematics and detection terminal, various signal parameters of the sensors, solenoid valves can be detected by special instruments.
• For example, voltage, resistance, frequency, etc
• The training units equipped with diagnostic communication link can be connected to a dedicated or general- auto decoders
• DSG automatic transmission system for read fault codes, clear fault codes read the data stream and other diagnostic functions
• Fault setting and assessment system ( see fault setting and assessment function description)
• Training sets rotational positions are equipped with safety shields to avoid security risk
• Mobile device with locking casters which easy to move and facilitate to teach

Specification:

• The workbench with high-grade automotive paint, paint treated at high temperatures, against moisture and rust, with beautiful and durable appearance
• GB standard high quality material for support frame (40 * 60 * 3mm welding square pipe)
• Dimensions: 1200 × 1000 × 1800mm

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

Product Details:

• It is an open type instructional apparatus with original parts.
• This unit is capable of operation when a standard battery is connected to the given terminals
• Consisting of all essential parts as self starter, alternator, ampere-meter, horn, long lights with dipper light, park-lights, dipper, back stop light and switches.
• The whole system is beautifully fitted on 100 x 80 cm base with electric motor working on 220 volts A.C and capable to drive the alternator
• Without Battery.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days

Product Details:

All the parts of a actual tractor are cut section to demonstrate the working of internal parts. This actual cut section model is painted beautifully with different colours combinations. In this model the working of tractor is demonstrated with the help of actual parts assembled on an iron frame. This model helps the student to understand the working of the Tractor very easily. It is specially made dissectible for demonstration purposes. The model will be supplied with key card & very interesting literature regarding working of the tractor.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basiss
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

Product Details:

• To know about the construction, pipes connection of hydraulic brake system, master the diagnostic method of common faults.
• The model of real hydraulic brake system is appointed by customers, including air can, compressor, distributing valve, brake master cylinder, brake cylinder, front/rear axle, brake drum
• Parts of arrester brake, brake caliper and cylinder are sectioned
• Pressure gauges show the pressure change of all cylinders

Specifications:

• Compressor is driven by AC220V power
• The whole stand is made of international standard steel and dealt with plastic spraying
• Power: AC220V
• Panel: DC12V; leakage protection
• Size: 2200mm*1800mm*1600mm
• Weight: 60kg

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

Product Details:

• Dual high definition lens: The dash cam brings high quality image in 1080P at 15 frames per second with 150 degrees high definition full glasses front lens and the car camera also equipped with water-proof rear cam to proved more comprehensive and clearer recording for you.
• Safeguarding your vehicles: Built-in G-sensor is triggered by a g-force event like an impact or a sudden braking maneuver.
• Whenever an event is detected, the camera will automatically mark the current footage for safekeeping, and will not be overwritten in loop recording. Turn on the parking mode, the cam will come to life and start recording, files are automatically marked for safekeeping whenever an impact is detected.
• Picture-in-picture display: The Front view and rear view videos are displayed on the screen in a picture-in-picture appearance. One-button switch can toggle the display of the two views in either the full screen or the inset window respectively, or turn off the picture-in-picture display
• Seamless Video Recording: Automatic seamless video recording in loop to use the storage efficiently, with the earliest unlocked video clips being overwritten when reaching the storage card's maximal capacity.
• Customizable video clip length of 2, 3 and 5 minutes
• Support 32GB TF card (MAX): It is better to use above 8 GB Class 10 TF card .

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

Feature:

• An education unit of hydraulic clutch structure inside manual transmission.
• Able to teach operation principle of hydraulic clutch effectively.
• Paint for vehicle is used in painting and coating.
• Each incised section is painted with different colors for education efficiency.
• The entire process of ISO9001 and D.C.C.A.P.T of TQC method by

Specification:

• Composition: Clutch pressing board, Clutch pedal, Clutch cylinder
• Size: Approx. 400 X 300 X 300 mm
• Weight: Approx. 20 kg

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

Transparent Truck Lucid Whole Model educational equipment is professional teaching equipment for colleges, vocational schools, Truck driving training and vehicle repairing field. The interior mechanical structure and function of truck is clearly understood under its demonstration and operation to make students and learners raise their initial knowledge of the truck's structure and its working principle.

Specifications:

• Overall size: Length 400cm x Width 140cm x Height x 150cm
• Total net weight: 100kg
• Voltage: 220V single-phase
• Max power: 200W

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

Features:

• The corrosion studies kit allows simultaneous study of up to eight corrosion cells each containing three test specimens.
• Sample mounting in a manner to minimise secondary effects.
• Corrosion rates measured visually and by weighing.
• Stirring by air or inert gas.

Comprising:

• A service panel
• Air pump
• Eight test cells of glass construction, with specially machined lids enabling samples to be mounted
• Test cell supports
• Digital pH meter
• Specimen pieces of steel, zinc, brass and copper
• Platinum electrodes
• Low voltage supply
• Associated glassware, tubing and wiring.

Additional Information:

• Item Code: DIUO013
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Exhaust Gas Calorimeter:

• Determination of the amount of heat contained in the exhaust gas from test engines
• Calorimeter consisting of finned pipe heat exchanger and insulated tank
• Instrumentation: 4 temperature sensors, flow meter
• Measuring amplifier with digital displays
• Connection between engine and calorimeter using exhaust gas hose

 

Technical Data:

Calorimeter:

• Insulated, stainless steel
• Finned pipe heat exchanger
• Heat exchange area on exhaust gas side: 1,169m²
• Heat exchange area on water side: 0,164m²

 

Measuring ranges:

• Exhaust gas temperature: 2x 0…600°C
• Water temperature: 2x 0…200°C
• Flow rate: 0...600L/h

Additional Information:

• Item Code: DITE033
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

The teaching board is based on the vehicle charging system. It can fully display the composition and working process of the car charging system.

Structure and composition of Automobile Charging System Teaching Board:

• Charging system components, motor, voltmeter, ignition switch, fault set and simulation system, control panel, mobile stand.

 

Features:

• Teaching board is based on the real car charging system.
• Each system works properly and the working principle and process of the car charging system can be demonstrated.
• The detection terminal is mounted on the teaching board. Electrical signals, such as resistance, voltage, current, frequency, etc of the electrical components can be measured.
• It has the specialized troubleshooting and set areas.
• You can set multiple common faults, stimulate the fault, test the fault and solve the fault.
• After setting the fault, the student can use the instrument to check out the location and content of failure through the fault troubleshooting exercises.

 

Specifications:

• Mobile bench with locking casters, it can be moved freely
• Power supply: AC 220V,50Hz
• Dimensions: About 1260x850x1860mm

Additional Information:

• Item Code: DIACM431
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

The device is designed based on the electric window, central control door lock, and rearview mirror, to holistically demonstrate structures and operation of these systems. The device applies to theoretical teaching and maintenance training of the electric window, central control door lock, and rearview mirror in secondary and senior vocational skill schools, normal education and training institutions.

Specification:

• Operating Voltage: 12 V DC
• Three Phase asynchronous motor

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: export worthy

Product Details:

This trainer will provide the instructor with a simulated anti-lock braking system for group or whole-class demonstration, using components from a commercial ABS. This includes all the individual components of the system, either real or simulated, presented on a moveable, steel-frame panel with each component clearly identified. The system will demonstrate the basic principles of ABS, including wheel speed sensing, signal processing, fluid pressure and modulation, together with brake pressure measurement. It is possible to introduce controlled faults into the system, which can be monitored by means of a diagnostic plug.

 

The trainer will allow the instructor to demonstrate the following:

• ABS fundamentals
• The electronic control unit (ECU)
• Electronic wheel speed sensor components
• Modulator and hydraulic control units
• Actuator circuits and components
• The effects of wheel locking
• Self diagnosis & fault codes

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy