Bitumen Testing Equipment

Product Details:

The unit is compact with in-built timer to control duration of penetration presetted in factory to 5 seconds. The instrument is provided with leveling screws.

• Dial diameter150 mm
• Graduated division 400
• Spindle Frictionless

• No. of container: 3
• Dia x depth: 55mm x 35mm
• Automatic Digital Timer
• Timer switch type: Second, Minutes & Hour
• Timer interval: 1/10th sec.
• Plunger: Release with push of a button and automatically stop after the preset time duration

• No. of cone: 3
• Angle: 30°
• Length: 35 mm
• Weight of cone spindle: 80 gm

• No. of gauge: 1
• Hole dimension: 1.75 mm x 1.50 mm
• (thick x dia)

• No. of Dish: 1
• Inside diameter: 90 mm
• Depth: 55 mm

• No. of needle: 5
• Type: Fully Hardened, tempered s. steel
• Length x dia: 50 mm x 1.00 mm
• Temper angle: 8.7° ~ 9.7°

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

This can be used with many kind of testing accessories to test the compressive strength, indirect intensity test and bearing ratio of soil and pavement material. It can also be used to test the thermal stability and Marshall test of bituminous material.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

We are offering ductility testing machine. The apparatus consists of a water bath having inner chamber made of aluminium and fitted with heater and a circulating pump to maintain uniform temperature. Temperature is controlled by a thermostat / digital temperature controller cum indicator. one half of the briquette moulds is fixed on a fixed plate in the water bath and other half of the briquette mould is fixed to a carrier, which slides over a rotating threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the water bath.

Specifications:

• A pointer is fixed to the carrier moves over a scale graduated from 0 - 100 cm x 1 mm fixed on the bath with "0" (zero) of the scale towards the fixed plate side.
• The rotating shaft has two speeds of travel for the bracket, 50 mm / min and 10 mm / min, which can be selected by a clutch.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Product Details:

• Product group(s): Bitumen, Viscosity
• User group(s): Bitumen, Road Research, Tar, Viscosity

Scope:

• To measure the viscosity by determining the efflux time of a warm sample, through a 10 or 4 mm orifice
• Suitable for road tars, cutback asphalts and high-viscous bitumen emulsions with efflux times in the range of 15 to 500 sec
• Single-Place Unit
• Electrically Heated
• Test Cups with different orifices

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

The 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

For determining bitumen percentage in Bituminous paving mixtures. Bitumen Extraction Test Apparatus has a removable, precision machined, aluminium rotor bowl, mounted on a vertical shaft. A filter paper disc is pressed in-between the rotor bowl and cover plate by tightening a knurled nut. The bowl assembly is enclosed in a housing operating model; the rotor bowl is coupled to a motor. The solvent may be introduced during test through a cup on the housing cover.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

This machine is used to determine the asphalt content of hot mix asphalt (HMA) paving mixtures and pavement samples by removing the asphalt is an ignition furnace by means of sample heating not by means of solvents.

Application:

• To determine the asphalt content of hot mix asphalt (HMA) paving mixtures and pavement samples

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

The bituminous mixture must be prepared at the prescribed temperature according to the EN standard. For this reason the mixer can be equipped with thermostatically controlled heater. The Heating Mantle heater is fitted with a digital thermostatic controller and can easily be fitted to the Mixing Bowl.

Specifications:

• 7,5 litre capacity Laboratory Asphalt Mixer is designed for mixing of soil and asphalt samples to be used for mechanical tests as compaction, indirect tensile, Marshall etc.
• The mixing head rotates at speeds of 10 to 240 r.p.m. and the whisk from 20 to 480 r.p.m.
• The user can adjust rotation speed between given values easily by using a control knob fitted to the front panel.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

• Specifically designed
• Long lasting
• Reliable
• High finish
• Less maintenance

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Features:

• Internal chamber and external frame made of stainless steel
• Double door insulation with fiber glass
• The oven is equipped of a dual safety thermostat to prevent accidental overheating

Specifications:

• Temperature range: Room temperature to 200°c
• Rotation speed: 5 -6 rpm

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Specifications:

• Controller can be wall mounted to minimize vibrations.
• Push button and walk away while machine runs unattended.
• Memory holds "last test" cycle settings.
• Shuts off automatically at end of test cycle.
• Dimensions are 18" x 18" x 18" (457 x 457 x 457mm)

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Specifications:

• Heavy Duty 2 speed Concrete Drilling Machine
• Drills horizontally and vertically and angles
• Lightweight & strong aluminium variable angle stand
• Drilling depth gauge on stand
• Easy mounting system
• Drill Guide
• Precise drilling accuracy
• Quick release handle
• Wheels & strong handle for easy mobility
• Powerful 3500W motor
• 240V
• 50 Hz Frequency
• No Load Speed – 900/480rpm
• Weight – 30.2kg (machine only)
• Overall Size – 920 x 400 x 250mm
• Water attachment for wet drilling
• Safety Switch
• 6 Months Electrical Warranty

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy