Product Details:
Condition | New |
Mono-Block Pump | no |
Bend | no |
Elbow | no |
Gate Valve | no |
Stop Watch | no |
Test Type | no |
Grade | Semi-Automatic |
Additional Information:
Product Details:
Brand | DIDAC |
Material | ms |
Capacity | 0-100 kn x 1 kn |
Ball Valve | no |
Bend | no |
Control Panel | yes |
Stop Watch | no |
Test Type | no |
The instrument is useful for testing specimen from 50mm dia to 100mm and of thickness of half the diameter. This is to test for indirect measurement of tensile strength of rocks. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain platens are supplied. A pressure gauge capacity 0-100 kn x 1 kn is fixed at the base of jack. A maximum pointers is also provided on the gauge, a pair of semi circular platens for 50mm dia samples also provided. The instrument can be used in field also.
Additional Information:
Product Details:
Model Number | DICTE123 |
Phase | single |
Automation Grade | Manual |
Brand | DIDAC |
Material | METAL |
Floor Area | no |
This Concrete Test Hammer microprocessor operated, entirely designed and manufactured by with advanced technology, performs basic concrete testing with continuous automatic recording of all parameters in accordance with EN 12504-2 Specifications, register and process data and then transfer them to a PC The unit consists of the standard mechanical but equipped with an electronic transducer that measures the rebound values and supplies automatically the results on a graphic display.
Standards:
Additional Information:
Product Details:
Weight (kg) | 55kg |
Diameter (mm) | mm 16x600 |
Automation Grade | Semi-Automatic |
Capacity (kg) | 50kg |
Color | blue |
Brand | DIDAC |
Material | METAL |
Dimensions | 500x400x1510 mm |
Additional Information:
Product Details:
Brand | DIDAC |
Inspect Depth | NO |
Color | blue |
Material | stainless steel |
Floor Area | no |
Vertical Arm | no |
No Of Spring Balance | 2 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | DIDAC |
Material | Steel |
Operating Frequency | Voltage 380v |
Dimensions | 10.5 cm diameter x 40.5 cm height |
Diameter | 10.5 cm diameter x 40.5 cm height |
Electricity Supply | 0.75kW |
Total Weight Of Apparatus | 800 |
Additional Information:
Product Details:
Condition | New |
Piston Stroke (mm) | NO |
Number Of Cycles | NO |
Color | White, Blue |
Motor | NO |
Grade | Manual |
Additional Information:
Product Details:
Brand | Didac |
Material | Stainless Steel |
Operating Frequency | 0 to 105 Deg C |
Dimensions | 350 x 740 x 300 mm approx |
Diameter | 2 mm mesh, 140 mm dia. x 100 mm long |
Floor Space | yes |
Electricity Supply | 230 V, 1 ph, 50 Hz, 250 W |
Total Weight Of Apparatus | 30 Kg approx |
Additional Information:
Product Details:
Automation Grade | Manual |
Gear Box (inch) | NO |
Color | blue |
Brand | DIDAC |
Material | Iron |
Max Weight | 200-400 kg |
Vertical Arm | no |
Features:
Additional Information:
Product Details:
Voltage (V) | 220V |
Frequency (Hz) | 50Hz AC Supply |
Phase | single |
Motor Power (HP) | 2880RPM |
Condition | New |
Automation Grade | Semi-Automatic |
Mortar Cube Vibrating Machine is used for vibrating the mix in moulds at a frequency of 12,000 ± 400 cycles per minute. The vibrator is mounted over 4 coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The centre of gravity of the vibrator, including the cube mould, is either at the centre of eccentric shaft or within 25 mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds.
Specifications:
Name | Type of Timer | Motor | Elec. Supply |
Vibrating Machine | Analogue | ½ HP 2880RPM | 220V, Single Phase, 50Hz AC Supply |
Vibrating Machine | Digital | ½ HP 2880RPM | 220V, Single Phase, 50Hz AC Supply |
Additional Information:
Product Details:
Brand | DIDAC |
Material | IRON |
Dimensions | 2500x500x1300 mm |
Floor Area | no |
Vertical Arm | no |
Electricity Supply | 220-240 V 1 Ph 50 Hz |
Total Weight Of Apparatus | 240 Kg |
Concrete Permeability Apparatus fully automatic apparatus is designed to carry out water permeability tests on cubic concrete specimens max.150 mm side and cylinder specimens max.160 mm diameter. The specimens are submitted to hydrostatic stress for a pre-set period. The water permeated through the test specimen is directly collected and measured into a graduated cylinder. It is therefore possible to determine the permeability coefficient in cm/sec. by the attached formula. The equipment consists of a strong metallic frame holding four cells which are hot-galvanized for anti-corrosion protection. Each cell includes a pressure control manometer.
Specifications:
Additional Information:
Product Details:
Brand | DIDAC |
Material | stainless steel |
Diameter | 130mm diameter, 200mm |
Dimensions | 700 x 850 x 300 |
Floor Area | no |
Surface Treatment | yes |
Total Weight Of Apparatus | 40kg |
Flow Table test set is used for concrete mixes with high workability. The test determines the flow index as a mean measurement of the diameter of the specimen after working on the flow table. The apparatus consists of a double steel table, the upper table measuring 700x700mm and hinged at one side to the lower table. The top table is inscribed to allow measurement of the flow. All parts are protected against corrosion.
Specification:
Additional Information:
Product Details:
Driven Type | Electric |
Frequency (Hz) | 50 |
Brand | DIDAC |
Material | Steel |
Current | Hydraulic,0.75kW |
Total Weight Of Apparatus | 800 Kg |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | DIDAC |
Material | stainless steel |
Application | Laboratory |
Floor Area | no |
Floor Space | yes |
Vertical Arm | no |
Total Weight Of Apparatus | 14 |
The water column type consists essentially of a stainless steel flanged cylindrical vessel with cover assembly, incorporating the measuring cylinder, pressure gauge and valves. Supplied complete with hand pump and calibration cylinder apparatus which is essential for adjustment to site barometric pressure. The cylindrical vessel of all models can also be used as unit weight measure for fresh concrete for density determination.
Specification:
Additional Information:
Product Details:
Brand | DIDAC |
Frequency (Hz) | 50/ 60 |
Voltage (Volt) | 220 - 280 |
Driven Type | Electric |
Material | Steel |
Floor Area | no |
Vertical Arm | no |
Additional Information:
Product Details:
Brand | DIDAC |
Material | aluminium |
Dimensions | 420mm x 730mm x 350mm |
Diameter | 300mm |
Floor Space | yes |
Electricity Supply | 220V-1 Phase-50 Hz |
Speed Range | 50-600 rpm |
Total Weight Of Apparatus | 37 Kg |
Additional Information:
Product Details:
Brand | DIDAC |
Material | MS |
Floor Area | no |
Vertical Arm | no |
Electricity Supply | 220 240V 1ph 50Hz at 10A |
Frequency | 0 to 105 deg C |
Total Weight Of Apparatus | 50-70 Kg |
Specifications:
Additional Information:
Product Details:
Brand | DIDAC |
Color | GREY&SILVER |
Grade | Semi-Automatic |
Condition | New |
Additional Information: