Electronics Trainer

Product Details:

Features:

• A self contained Trainer
• Built in DC Power Supply
• Fully documented operating manual
• All IC’s are mounted on IC Sockets
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• 16K Bytes of EPROM with 8K bytes of Battery Backup RAM
• 48 I/O Lines, Three Channel Timer/Counter
• PC Serial Interface
• Seven Segment Display with 25 Keys Hex Keypad
• Power-full Command like Single Stepping, Break Point, Full Clock Execution, Examine Memory/Register
• ploading & Downloading to and from PC in Windows98/XP/NT
• Attractive Wooden enclosures of Light weight Australian Pine Wood
• Compact Size
• 2 Year Warranty

Product Details:

Objective:

• To observe 60 HZ, 1hz output on a led logic monitor using ic 5369 and crystal
• The IC7490 is constructed as a divide by 10 counter and divide 6 counter
• Pulse Generator Using 5369 Crystal For Output Of 60 HZ And 1HZ

 

Technical Specification:

• Built in power supply: +5V & +12V DC
• Mains: 230V AC
• Dimension: 27CMS X 17CMS [metal cabinet]
• Weight: 2KGS APPX

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Features:

• High strength
• Hassle free operation
• Robust design
• Longer service life
• Highly compact

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Our Satellite Trainer has built in antenna system which operates in the microwave frequency range of 5.8GHz & 2.4GHz. The trainer provides a wide range of Baud rates / Microwave modulation rates in a PC to PC link. The basic components of a satellite system are its antennas which consists of repeaters and receivers also known as transponders. When we transmit a signal from earth to the satellite it refers to up-link and when a signal is received on earth from the satellite it is called down-link. The uplink frequencies are in the range of 5.9 Ghz to 6.4 Ghz and the down link frequencies are in the range of 3.7 Ghz to 4.2 Ghz. These frequencies are used for Transmission from the satellite to the earth station.

 

Specifications:

• Receiver and Satellite Emulator.
• Variable path loss at uplink and downlink channels.
• Measurement and Analysis of Carrier to Noise Ratio and Signal to Noise Ratio to examine the quality of signal.
• High RF output power and low noise.
• Built in Interference Generator and Noise Figure Analyser.
• Condenser microphone and speaker are provided for audio link.
• Display of PLL synthesized frequency in Transmitter.
• Camera and Video monitor for video link.
• Transponder for up-link and down-link.
• Dish X 2 & Patch X 2 for linear & circular polarization study for Helix antennas for 2.4 & 5.8GHz.
• Signal monitoring outputs at uplink & downlink.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

The advantages and limitations of robots will be explored as students progress to design their own control programs using a robotic system simulator that can be connected to the real hardware.

Training Concepts:

• Manual Control of a Robot
• Flowcharts and Programs
• Sensing, Decisions and Counting
• Open and Closed Loop Control
• Transportation Around the Work-cell
• Manipulating Parts
• Industrial Robots
• Computer Integrated Manufacturing
• Pre-programmed Sequences
• Problem Solving

Activities Include:

• Manually control a robot.
• Use a flowchart to write a computer program in BASIC.
• Use the input from a sensor with the IF command in a BASIC program.
• Identify the purpose of belt drives.
• Write programs for open and closed loop control systems.
• Identify different types of sensors used in the work-cell.
• Identify economic and practical reasons why robots are used in industry.
• Write a program to control a robot using inputs from a keyboard.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Other Details:

• IC Regulated D.C. Power Supply
• Fiber-Optic Transmitter
• Fiber-Optic Receiver
• Potentiometer to vary the current of LED in Transmitter and Photo transistor in receiver
• Adequate no of other electronic components
• Mains ON/OFF switch, Fuse and Jewel light
• The unit is operative on 230V ±10% at 50Hz A.C. Mains
• Adequate no. of patch cords stackable 4mm spring loaded plug length ½ metre
• Good Quality, reliable terminal/sockets are provided at appropriate places on panel for connections / observation of waveforms

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Features:

• Precisely designed
• Compact design
• Easy to operate
• Fine finish

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

The Digital Electronic Trainer is intended for elementary as well as advance training of digital electronics. The trainer cover regular digital circuits by solder less inter connections through use of 2 mm brass terminations and patch cords. Various clock generators, logic level input / output indicators and DC regulated power supply are in built. The unit housed in sunmica finished wooden box enclosure with provision for safe keeping of mains cord, patch cords and top lid for protection during storage.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days

Product Details:

Features:

• Synchronized Sine waveform output of Frequency 1 KHz 2 KHz.
• Selectable sampling frequency of 2, 4, 8, 16, 32 KHz.
• Sample Circuit/Output, Sample Hold Circuit/Output

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

The Antenna Trainer is ideal for introducing the principles of Antenna operations and design. The training system includes a set of modular mechanical elements forming various antennas, a transmitter unit and a detector unit. The Antenna Training System comes with a motorised antenna unit that allows for the automated recording of radiation patterns of the antennas. This operation is normally performed by rotating the transmitting antenna at different angles by hand and measuring the radiated intensity. The motorised antenna unit consists of a microcontroller based system for capturing, displaying and printing of the antenna radiation patterns. The system captures a signal at an interval of ten rotations driven by a stepper motor and the radiation pattern is then displayed on the PC.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Instrumentation Trainer that we make available, is used for understanding various concepts in an easy manner. Made with top quality components, Instrumentation Trainer Kit offered by us is precision engineered for excellent functionality.

Feature:

• Completely self-contained stand, alone unit
• Built in IC based DC regulated power supply
• Test points provided on panel at various stages in the circuit.
• Set of required number of Patch cords.
• Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy

Product Details:

Specifications:

• Frequency of the mode:1. 0.1 Hz to 2 MHz (FG 2002)2. 0.1 Hz to 10 MHz
• Output wave form: Sine, Triangle, Squre, ramp ± Pulse TTL/CMOS and OUTPUT synchronous output Less than 1% distortion at 10Hz-100KHz Less than 0.5dB frequency response at 0.1Hz-100Khz
• Amplitude: Not less than 50Vp-p (open circuit.
• DC Voltage: 0~±10V continuously adjustable
• Symmetry Range: 90:10 – 10:90
• Rising edge of square: Less than 100ns (FG 2002), Less than 35ns (FG 2010)
• Sine Characteristic Distortion: Less than 1% at 10H-100KHz
• Frequency Response: 0.1 Hz~100MHz: ≤±0.5 dB.TTL/CMOS
• Output Level: TTL low level than 0.4V in pulse wave, high level less than 3.5V, CMOS low less than 0.5V in pulse wave, high level 5V-14V continuously variable.
• Rising Time: Less than 100ns

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: by sea/air basis
• Delivery Time: 90-120 days
• Packaging Details: Export worthy