Didac International
Janakpuri, New Delhi, Delhi
GST No. 07DCLPM4529J1Z6
TrustSEAL Verified
Call 08048838166
89% Response Rate
SEND EMAIL
Product Details:
| Automation Type | Semi-Automatic |
| Warranty | 2 years |
| Brand | DIDAC |
| Material | Stainless Steel |
| Operating Frequency | 250 deg C |
| Dimensions | 0.65 x 0.97 x 0.55 m |
| Floor Area | No |
| Vertical Arm | No |
| No Of Hanger For Weights | 3 |
| No Of Spring Balance | 2 |
The vapour-liquid phase equilibria of mixtures with two or more components are an essential basis for the determination of the required number of theoretical separation stages and other distillation conditions. The model is designed for operation under vacuum (option A) or at overpressure up to 3 bar absolute.
Technical Data:
Additional Information:
Product Details:
| Brand/Make | DIDAC |
| Model | DEK120 |
| Material | Stainless steel |
| Operating Frequency | 45 deg c |
| Control Panel | yes |
| Design Type | Standard |
| Water Circulation | yes |
The column is made of Stainless Steel material packed with Borosilicate Glass rasching rings. An electrically heated reboiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form at the top of column are condensed in the shell and tube type condenser by circulating cooling water, supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is provided for pressure & temperature measurement wherever necessary.
Technical Data:
Additional Information:
Product Details:
| Warranty | 2 years |
| Automation Grade | Semi-Automatic |
| Model Number | DEK124 |
| Material | stainless steel |
| No. Of Frame | 2xd |
| Speed | 232 |
| Is It Anodized | Anodized |
| Color | Blue |
The set up consists of a glass column packed with Rasching rings. Liquid is fed at the top of the column through distributor. The solute gas and air are measured separately, mixed in a mixing chamber and then passed through the packed column vertically upward and absorbed in liquid. All the flow rates can be independently varied to simulate different conditions. Liquid sample can be taken out from the sampling point at the bottom of the column for analysis.
Technical Data:
Additional Information:
Product Details:
| Capacity | 20l |
| Model | DIUO019 |
| Voltage (V) | 2 kW |
| Automation Grade | Automatic |
| Color | Blue |
| Brand | DIDAC |
| Dimension (mm) | 0.80 x 0.90 x 0.50 m ( H x L x D ) |
| Material | Stainless Steel |
| Operating Frequency | 0 to 105 Deg C |
| Dimensions | 300 mm |
| Floor Area | No |
| Vertical Arm | No |
| Design Type | Standard |
| Electricity Supply | 20 m |
| Frequency | 0 to 105 deg C |
| Speed | 1500 RPM |
| Distance Of Length In Between | 1.00 m |
Features:
Additional Information:
Product Details:
| Model | DEK116 |
| Brand | DIDAC |
| Material | Stainless steel |
| Warranty | 2 years |
| Design Type | Standard |
| Ball Valve | No |
| Bend | No |
| Control Panel | Yes |
| Elbow | No |
| Gate Valve | No |
| Stop Watch | No |
| Test Type | No |
The column is made of Stainless Steel with seven plates for mounting the bubble caps. Each plate is provided with one bubble cap. An electrically heated reboiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapors form at the top of column, are condensed in the shell and tube type condenser by cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation provided for pressure & temperature measurement wherever necessary.
Technical Data:
Additional Information:
Product Details:
| Design Type | Standard |
| Brand | DIDAC |
| Material | Stainless steel |
| Current | 0-200W |
| Model | DEK118 |
| Floor Area | No |
| Ball Valve | No |
| Bend | No |
| Control Panel | Yes |
| Elbow | No |
| Gate Valve | No |
| Stop Watch | No |
| Test Type | No |
| Water Circulation | Yes |
The column is made of stainless steel material with seven sieve trays. An electrically heated reboiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form at the top of column are condensed in the shell and tube type condenser by cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is provided for pressure & temperature measurement wherever necessary.
Technical Data:
Additional Information:
Product Details:
| Model Number | DEK131 |
| Diameter (mm) | Dia. 80 mm. Length 500mm |
| Condition | New |
| Brand | DIDAC |
| Material | Borosilicate Glass |
| Automatic Grade | Semi-Automatic |
| Design | Standard |
This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream.
Technical Data:
Additional Information:
Product Details:
| Warranty | 2 years |
| Model Number | DEK129 |
| Number Of Trays | 1 |
| Condition | New |
| Brand | DIDAC |
| Material | Stainless Steel |
| Ball Valve | No |
| Bend | No |
| Control Panel | Yes |
| Elbow | No |
| Automatic Grade | Semi-Automatic |
| Gate Valve | No |
| Design | Standard |
| Stop Watch | No |
| Test Type | No |
This is a dryer in which moisture removal takes place by means of forced draft action created by hot air. The set-up consists of an insulated double wall chamber. Inside the chamber a tray is attached directly to a electronic weighing balance, which is fitted on the bottom, outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Air from a blower passes through a heating chamber and is used as drying agent. Arrangement is done to vary the airflow rate.
Technical Data:
Additional Information:
Product Details:
| Capacity | 3 Ltrs |
| Model | DEK121 |
| Brand | DIDAC |
| Material | Stainless steel |
| Warranty | 2 years |
| Floor Area | No |
| Ball Valve | No |
| Design Type | Standard |
| Bend | No |
| Control Panel | Yes |
| Elbow | No |
| Gate Valve | No |
| Stop Watch | No |
| Water Circulation | Yes |
The equipment consists of jacketed pressure vessel for distillation. Steam from a steam generator can either be allowed to enter in the outer jacket or in the vessel. The vapours form the top of the vessel are condensed in the shell and tube type condenser by circulating cooling water, supplied by laboratory overhead tank. The condensate is collected in a separating chamber. The set-up is fitted with steam trap, control valves, pressure gauge, temperature sensors and other instrumentations required.
Technical Data:
Additional Information:
Product Details:
| Model | DICE002 |
| Gear Type | No |
| Grade Standard | Yes |
| Knife Edge Size | No |
| Phase | Single |
| Color | Blue |
| Brand | DIDAC |
| Material | Stainless Steel |
| Floor Area | No |
| Vertical Arm | No |
| Ball Valve | No |
| Bend | No |
| Surface Finish | Yes |
| Control Panel | Yes |
| Surface Treatment | Yes |
| Elbow | No |
| Gate Valve | No |
| Stop Watch | No |
| Test Type | No |
| Format | Yes |
| Water Circulation | Yes |
| Kit Size | No |
| No Of Spring Balance | 2 |
The distillation column is made completely of glass and it consists of a reboiler, of a bubble cap tray column and of a condenser with reflux head and valve. The distillate is collected into a glass tank after being cooled by a heat exchanger.
Technical Data:
Additional Information:
Product Details:
| Installation Services | Yes |
| Condition | New |
| Material | Stainless steel |
| Capacity | 30 LT |
| Brand | DIDAC |
| Floor Area | NO |
| Bend | No |
| Control Panel | Yes |
| Elbow | No |
| Gate Valve | No |
| Stop Watch | No |
This setup is designed to study the performance characteristics of solvent extraction of a particular component from a packed bed of solid material. The apparatus allows study of such systems as water/inorganic salts, water/sugar bed, methylene chloride/vegetable oil etc. The glass column is fitted with SS mesh to support the solid material. The solvent is introduced near the bottom of the column and it flows upward counter-currently to the solids. A pump supplies the solvent and flow rate is monitored by means of a Rotameter. Solvent feed tank is kept in a bath fitted with heater and digital temperature controller is used to maintain the constant temperature.
Technical Data:
Additional Information: