Didac International
Janakpuri, New Delhi, Delhi
GST No. 07DCLPM4529J1Z6
TrustSEAL Verified
Call 08048838166
87% Response Rate
SEND EMAIL
Product Details:
| Capacity | 4 LPG Corrosion Test Cylinders |
| Dimensions | 12 x 10 x 24 |
| Phase | Single |
| Brand | DIDAC |
| Size | 4 LPG Corrosion Test Cylinders |
| Material | Polishing Materials |
| Electricity Supply | 115 V, 60 Hz |
Consists of LPG Corrosion Test Cylinders, Water Bath, Copper Strips, Polishing Materials and the ASTM Copper Strip Corrosion Test Standards. LPG Corrosion Test Cylinders–Stainless steel cylinder with 1⁄4" needle valves for purging and admitting LPG samples. Dip tube with hook suspends copper strip in sample. Knurled, threaded cap with O-ring gasket hand tightens to a positive seal. Withstands hydrostatic test pressure of 1000 psig. LPG Corrosion Test Water Bath–Thermostatically controlled water bath submerges four LPG Corrosion Test Cylinders in an upright position. Controls temperature at 100 ±1°F (37.8 ±0.5°C) per ASTM specifications. Soxhlet reflux condenser and constant water level device maintain proper working depth. Polished stainless steel inner wall and powder coated steel outer wall construction.
Test Method:
Additional Information:
Product Details:
| Material | Stainless Steel |
| Automation Type | Automatic |
| Color | as per order |
| Capacity (milliampere) | 3000 ml |
| Brand | DIDAC |
| Size | 3000 ml |
| Condition | Good |
For determination of heat combustion of organic matter and calorific value and sulphur content of coal, sold and liquid fuels. The Bomb has a capacity of 3000 ml approximately. The bomb is provided with a high-pressure Schrader valve, which opens and allows filling , by oxygen because of oxygen pressure from the cylinder. Each bomb is tested as per the requirement of institute of petroleum . Supplied with, bomb calorimeter Vessel with bomb support, water jacket, and combined lid for calorimeter vessel and water jacket, stirrer, connecting leads, connecting tube to connect bomb and pressure gauge. Connecting tube with fine adjustment valve to connect pressure gauge and oxygen cylinder, pressure gauge on stand, spanner for oxygen tube connection, ignition wire (2 meters) Nichrome, Cotton Reel, stand for bomb Lid, Hook for lifting bomb, stainless steel crucibles, gelatine capsules, gas release valve, jacket thermometer (00C-500 C). Bomb firing unit, vibrator, and timer, illuminator with magnifier, pellete press, digital Beckman thermometer, and benzoic acid of known calorific value ‘O’ ring, ‘O’ ring for stirrer, valve for bomb and valve key.
Additional Information:
Product Details:
| Condition | New |
| Brand | DIDAC |
| Size (mm) | 9.5 mm |
| Material | Glass beaker |
| Dimension | 8.5 cm x 12 cm |
This apparatus is meant for determination of softening point of bituminous materials according to IP 58 and IS 1205. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition.
Features:
Additional Information:
Product Details:
| Color | as per order |
| Brand | DIDAC |
| Material | Brass Cup,water Bath Made a Copper |
| Is It Portable | Yes |
| Made Of | Water Bath Made of Copper |
| Power W | 500 wt |
The apparatus consists of one brass cup fitted with test flame arrangement. Stirrer placed on a water bath made a copper. The outer jacket of the water bath is fitted with a stand. For electrically heated apparatus a 500 wt heater is fitted to the stand which can be controlled by an energy regulator. For determination of flash point of petroleum products and mixture having a flash point below 49° (120°F.)
Additional Information:
Product Details:
| Brand | DIDAC |
| Material | stainless steel |
| Floor Area | No |
| Vertical Arm | 27 mm |
| Floor Space | Yes |
| Electricity Supply | 220 to 240 V, 1 ph, 50 Hz, at 10 A |
| Frequency | 0 to 105 deg C |
| Surface Treatment | Yes |
Aniline Point Apparatus which is efficiently used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures. The product offered by us is manufactured using high grade components and sophisticated technology in adherence with the set industry norms. Our offered products mostly used in the pharmaceutical and medical industry such as scientific labs and medical companies.
Features:
Additional Information:
Product Details:
| Power (W) | 220 Volts |
| Color | as per order |
| Thermometer (deg. Celsius) | 28 c |
| Power Source | Electrically heated with energy regulator |
| Automation Grade | Automatic |
| Brand | DIDAC |
| Material | Copper Coil |
| Voltage | 220Volts |
Cleveland Flash Point & Fire Point Apparatus that is used for determination of flash point of petroleum products. These are designed under the strict command of our quality controllers keeping in mind the industry guidelines.
Features:
Additional Information:
Product Details:
| Size | 1-2 Liter |
| Color | Silver |
| Capacity | 1-2 Liter |
| Brand | DIDAC |
| Material | SS |
| Floor Space | Yes |
Additional Information:
Product Details:
| Size | 12 x 9 x 12 |
| Phase | Single |
| Brand | DIDAC |
| Material | SS |
| Electricity Supply | 230 V |
| Frequency | 50 Hz |
Kinematic Viscometer Bath Determination of Viscosity of Fuels, Oils & Lubricants & Petrochem Raw Materials at constant temperatures. With sincere intentions to preserve and uplift our reputation in the industry, we are offering a comprehensive assortment of Kinematic Viscosity Bath. This viscosity bath is equipped with toughened glass window from both sides, top lid having holes for keeping viscometer holders, circulators pump on top of the body with controlled panel consists of switches & lamps for mains & controls fitted with digital display controller temperature range 5 ºC above to 95 ºC.
Other Details:
Product Details:
| Color | Black |
| Capacity (milliampere) | 25 cc |
| Phase | Single |
| Brand | DIDAC |
| Material | Mild Steel |
| Application | Lab use |
It is useful to determine the amount of carbon residue when an oil is evaporated under specified condition. The Carbon residue valves of crude Oil, residuam etc. These are useful in the manufacture of various lubricants. The apparatus consists of spun sheet iron crucible 25 cc Capacity, Sheet Iron hood and sheet iron block on a stand with triangular wire, and gas Burner. - Conradson Carbon Residue single Test Apparatus (Gas Burner) - Elect. Heating with energy regulator control. -Conradson Carbon Residue Four Test Apparatus with gas burner - Elect heating with separate regulator control.
Additional Information:
Product Details:
| Size | 10 Kg |
| Phase | Single |
| Brand | DIDAC |
| Floor Space | Yes |
| Electricity Supply | 220 V A.C. |
| Frequency | 50 /60 Hz |
| Dimensions | 300 x 300 x 600 mm |
The Pensky Marten Flash Point Apparatus allows for the determination of the flash point up to 370 °C of drying oils, solvent-type waxes, fuel oils, lube oils, suspensions of solids, liquids that tend to form a surface film and other liquids.
Requirements services:
Additional Information:
Product Details:
| Brand | Didac |
| Material | Stainless Steel |
| Usage/Application | Petroleum product test |
| Voltage | 220 V |
| IP Rating | IP67 |
| Flow | 20 to 2000 Seconds |
These Redwood Viscometer are designed for viscosity tests of petroleum products. They confirm to recruitment of IP 70. Two adaption of red wood viscometer are available No.1 for liquids having red wood flow 20 seconds to 2000 seconds and No .II for liquids whose flow time exceeds 2000 seconds. The complete outfit comprises hammer finished cooper chamber bath with electrical heating arrangements suitable to operate at 220 Volts AC mains with tap, silver plated oil cup with precision stainless steel jet, cup, cover ball, valve, and thermometer-clip. Stirrer and M.S. sheet stand with leveling screws. Suitable to operate at 220 Volts AC mains with tap, silver plated oil cup with precision stainless steel jet, cup, cover ball, valve, and thermometer-clip. Stirrer and M.S. sheet stand with leveling screws.
Product Details:
| Brand | DIDAC |
| Capacity (milliampere) | 50 ml |
| Phase | Single |
| Operating Voltage | 220 Volts |
| Color | Silver |
| Material | Stainless Steel |
| Application | Lab Use |
These viscometers are designed for viscosity tests of petroleum products. They confirm to recruitment of IP 70. Two adaption of red wood viscometer are available No.1 for liquids having red wood flow20 seconds to 2000 seconds and No .II for liquids whose flow time exceeds 2000 seconds. The complete outfit comprises hammer finished cooper chamber bath with electrical heating arrangements suitable to operate at 220 Volts AC mains with tap, silver plated oil cup with precision stainless steel jet, cup, cover ball, valve, and thermometer-clip. Stirrer and M.S. sheet stand with leveling screws. Suitable to operate at 220 Volts AC mains with tap, silver plated oil cup with precision stainless steel jet, cup, cover ball, valve, and thermometer-clip. Stirrer and M.S. sheet stand with leveling screws.
Additional Information:
Product Details:
| Number of Cups | 1 |
| Viscosity | 60 cc |
| Material | SS |
| Brand | DIDAC |
| Electricity Supply | 220 V AC |
| Frequency | 50 Hz |
Used for determining the viscosity of petroleum products and lubricants. Viscosity is measured by determining the time taken by 60 cc of the material to flow through a specified orifice. The apparatus consists of stainless steel bath with oil cup which is centrally placed in a water bath. The bath has a lid which contains a water cooling tube, two handles with two stirring blades, thermometer socket and a straight heater. Stirring is done by turntable arrangement. A thermometer can also be inserted into the cup cover. Two jets one universal and one furol can be screwed to the cup by a handle (without strainer, withdrawal tube and glassware) The temperature is controlled by energy regulator or voltage varrier. Suitable to work on single phase.
Additional Information:
Product Details:
| Color | copper |
| Brand | DIDAC |
| Power Hz | 50 Hz |
| Power Volt | 220V |
Consists of One Each of:
Additional Information: