Soil Testing Equipments

Product Details:

For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results of those soil which have low plasticity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm penetrates 25mm gives the liquid limit.

Features:

• Perfect design
• Longer service life
• Quality tested
• Cutting edge technique used
• Robust construction

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

Features:

• Fine finish
• Precise specifications
• Reliable performance

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

This apparatus is used for measuring pore water pressure and pore air pressure in soils. This is as per the principals outlined in the book. "Measurement of soil properties in Triaxial tests This is used as an accessory for Triaxia l test apparatus. The apparatus consists of a panel for wall mounting on which are fitted - 1 .0 to 10 kg/cm2 x 0.1kg/crn2 a pressure gauge, Bourdon tube type 20cm diameter Manometer : Glass U -tube manometer for measuring low positive pore pressures negative pore pressures and checking zero error of pressure gauge. It is provided with a mercury trap (Mercury supplied at extra cost. Null indicator made out of clear transparent perspex with mercury trap and cursor to indicate the mercury level. 50ml Burette for measuring the volume change in the soil specimen. Pressure pump fitted with four sleeve packed valves, Operated by means of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure. Copper coil and water reservoir The unit is tested against leaks upto l0 kg/cm sq.

Specifications:

• Max. load: 300KN
• Power: Electronic
• Energy: 1-50J/cm2
• Input VAC: 100-240v
• Spares: Polythene tube 3mm bore x 5 mm. O.D.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

Description:

• The industries where direct shear apparatus find application are construction, testing of rock samples, test of minerals, mining etc.
• The direct shear apparatus is available in 3 variants such as hand operated, motorized with single speed and motorized with 12 speeds.
• For determination of the direct shear strength of soils on specimen size 60 mm x 60 mm x 25 mm.

Specifications:

• Max. load: 300KN
• Power: Electronic
• Energy: 1-50J/cm2
• Input VAC: 100-240v
• Power: Manual

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

Consolidation of clay deposit leads to distress in buildings such as cracks and failures. Consolidation is reduction of volume of soil due to expulsion of water from its pore space caused by sustained loading. This phenomenon is time dependent. The one dimensional consolidation test performed on an undisturbed sample of clay is useful for understanding the history of the soil deposit. The test results can be used for calculating the settlement of structures built on clayey soil.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of an electrically operated rate of rotation is 1/60 R.P.M. It operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size vane height. The vane shaft is attached through the hollow upper shaft to are settable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied a sampling tube of 38mm. i.d. 150mm long can also be used as container.

Specification:

• Rate of rotating: 1/60 R.P.M

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

These devices are used in determining the liquid limit of the soil. The liquid limit implies the water content of the fine grained soil. It is the level at which soil resembles the characteristics of liquid.

Specification:

• The cup is raised and allowed to fall through a height of 1cm by the help of a lead screw provided at the back of the sliding carriage. Supplied complete with a case Grande growing tool.
• One ASTM Grooving tool and gauge block.

Features:

• User friendly interface
• Easy to operate
• Trouble free performance

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

It is designed in cooperation with Karol-Warner to be adaptable for a wide range of laboratory soil tests. It has the highest overall strain rate of the Triaxial Load Frames, which allows use for a wider range of test methods. Digital and analog components and sets that attach to the Load Frame are available for Unconfined Compression, CBR, Soil Cement and Triaxial testing, and sold separately. The Pro-Loader ll Frame has 10,000 lbf (44.5kN) capacity and 11.9x37.3in (302x947mm) WxH frame opening. Unit runs on a 3/4hp DC motor and the controller regulates strain rate of 0.02-2.0in/min (0.508-50.8mm/min) to ±1% of set point. A high-speed jog feature rapidly positions the platen for fast set-up and a wider range of test methods. Platen diameter is 8in (203mm). Sturdy, 14-gauge painted steel enclosure has adjusting nuts on the 1.25in (32mm) coarse-threaded rods to quickly adjust the horizontal cross-head height.

Features:

• Highly adaptable Load Frame accommodates various soil tests
• Capacity of 10,000lbf (44.5kN)
• Powerful ¾ hp motor
• Controller features higher overall strain rates

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

Features:

• Flawless and fine finish
• High durability
• User-friendly operations
• Rugged design
• Accurate in size
• Perfect in finish

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

It is used to measure the drying shrinkage of autoclaved portland cement and potential expansive reactivity of Cement aggregate combinations in mortar bars during storage on self-drying. The instrument consists of chanelled base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial gauge, reading to 0.002 mm x 12 mm or 0.01 X 25mm is fixed to the top. The plunger end of the dial Gauge can be located up on a 6.5 mm. dia ball or other reference point cemented in the specimen. On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standardiation bar with insulated grip and with 6.5mm dia ball mounted in the ends.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

This apparatus is used for the in place determination of the dry density of compact, line and medium grained soils and for layers not exceeding 500mm thickness. The complete apparatus consists one each of Small sand pouring cylinder,3 litre capacity fitted with conical funnel and shutter. Cylinder calibrating container, internal dia 100mm and 150mm height.

Specification:

• Color Blue
• Carrying Capacity 3 Litre
• Material for Construction Stainless steel

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY

Product Details:

Specification:

• Mould 100 mm dia, 1000 cc volume, Steel, with base plate & collar.
• Mould same as above, but made of Gun Metal.
• Rammer 2.6 kg x 310 mm controlled fall.
• Rammer 4.89 kg x 450 mm controlled fall.
• Mould, 150 mm dia., 2250 cc volume, steel, with base plate & collar.
• Mould same as above, but made of Gun Metal.

Features:

• Top in work
• Industry proven design
• Durable nature
• Robust structure
• Longer service life

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY SEA/AIR BASIS
• Delivery Time: 90-120 DAYS
• Packaging Details: EXPORT WORTHY