Thermodynamics Lab Equipments

Product Details:

Axial Steam Turbine:

• Single-stage axial impulse turbine, mounted in corrosion-resistant, sealed ball bearings
• Load on the turbine by eddy current brake
• Condenser with water-cooled coiled tube
• Steam supply from steam generator
• Various safety devices for safe operation
• Sensors and digital indicator for speed, temperature, pressure and flow rate

Technical Data:

• Single-stage axial impulse turbine
• Impeller inner diameter: 54mm
• Max. Speed: 40000min-1
• Max. Inlet pressure: 9bar abs.
• Max. outlet pressure: 1bar abs.

Measuring ranges:

• Pressure
• Steam inlet: 0...16bar
• Condenser: 0...1,6bar
• Differential pressure: 0...50mbar
• Cooling water flow rate: 0...720l/h
• Speed: 0...50000min-1
• Torque: 0...70nmm
• Temperature: 0...400°C

Additional Information:

• Item Code: DITE024
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Sea / Air Basis
• Delivery Time: 90-120days
• Packaging Details: Export Worthy

Product Details:

Pure water in the boiler is heated to its boiling point using a pair of cartridge heaters with variable power control. A sight glass on the front of the boiler enables the internal processes to be observed, namely boiling patterns at the surface of the water, and also permits the water level in the boiler to be monitored. Saturated steam leaving the top of the boiler passes around the pipe loop before condensing and returning to the base of the boiler for reheating. The operating range of the boiler and loop is 0-7 bar gauge. The top limb of the pipe loop incorporates a Platinum Resistance Thermometer (PRT), temperature sensor and an electronic pressure sensor to measure the properties of the saturated steam. A filling point on the top limb enables the loop to be filled with pure water and permits all air to be vented safely before sealing the loop for pressurised measurements. A vapour offtake, with isolating valve, enables steam from within the loop to be passed through a throttling calorimeter, the purpose of which is to demonstrate how the dryness fraction of the saturated steam in the loop can be determined. The steam expands to atmospheric pressure as it is throttled and a second PRT temperature sensor measures the temperature of the steam following expansion..

Product Details:

• A benchtop unit comprising a boiler vessel and pipe loop with a pressure-relief valve to limit the operating pressure to eight bar gauge
• A sight glass on the front of the boiler enables the boiling patterns to be observed and a Bourdon-type gauge indicates the pressure in the apparatus at all times for safe operation
• A throttling calorimeter mounted adjacent to the pipe loop enables the condition of the saturated steam to be determined by measuring the temperature of the steam following throttling to atmospheric pressure
• Temperatures in the pipe loop and inside the throttling calorimeter are measured using PRT sensors and pressure in the loop is measured using an electronic pressure sensor
• The boiler is heated by a pair of 500W electric heating elements with variable power control and overtemperature protection
• A comprehensive instruction manual is included with a range of fully detailed laboratory teaching exercises

Additional Information:

• Item Code: DITD003
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

The comprises a cooling tower mounted on top of a heated water reservoir. The cooling tower is manufactured from clear acrylic for visibility, and has an easily removable front face to allow different packing materials to be inserted. Two blocks of different density material and two blocks at reduced height are supplied as standard, but other material can be used for more advanced investigations. The supplied material is in robust, preformed blocks encased in clear plastic which are easy to handle and store. Water is pumped from the reservoir to the top of the tower using a variable-speed pump. An array of spray nozzles ensures an even distribution of the water throughout the column section. As the water descends through the packing material it is cooled by the air flow from the variable-speed fan, which blows air upward through the tower.

Specification:

• Benchtop unit to demonstrate operation of a forced draught cooling tower
• Computer controlled, supplied with Windows software
• Clear acrylic tower for visibility, dimensions 700 mm x 150 mm x 150 mm
• Removable front panel on the tower, enabling different packing materials to be tested
• Supplied with four blocks of industrial packing material giving two different packing densities and three different packing heights
• Full height of packing 500mm
• Water reservoir with 1.75kW (nominal) electrical heater
• Closed loop PID control of water temperature or constant power operation of the heater, variable from 0-1.75kW (nominal)

Additional Information:

• Item Code: DIUO021
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 90-120 Days
• Packaging Details: Export Worthy

Product Details:

Product Details:

• The test rig can conduct various performance test on a Single cylinder 2/4-stroke Diesel engine to study its output power
• Volumetric Efficiency
• Thermal Efficiency
• Heat Balance under various load condition

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

Two main components from main parts of the test rig. Welded steel base plate, complete with Rope Brake Dynamometer/ A.C. DC Generator /Eddy Current Dynamometer provided with cooling water arrangement. Panel board positioned over the base plate consisting of fuel system with flow measurement by burette, air flow measurement system, temperature and speed indicator.

 

Dynamometer (as applicable):

• The Dynamometer used is a Mechanical Brake capable of absorbing a maximum load of 5HP at a speed of RPM.
• The Loading device used is an AC Alternator of matching capacity to load the engine upto 5HP at 1500 RPM along with Resistance loading arrangement with selector switches.
• DC Generator of matching capacity to load the engine up to 5 HP at 1500 RPM along with Resistance loading arrangement provided with selector switches.
• The loading device used is an Eddy Current Dynamometer of matching capacity to load the engine upto HP at 1500 RPM.

 

Instrumentation (as applicable):

• The following instrumentation is provided.
• 'U' tube manometer for air flow rate
• Burette for fuel flow rate
• Digital Temperature Indicator-Multi point indicator with thermocouples.
• Digital Voltmeter, Ammeter

 

Controls:

• The test rig is arranged for manual control with Hand cranking start arrangement for engine starting.

 

Fuel measuring arrangement:

• Fuel Measuring Arrangement consists of fuel tank, burette and suitable cock all mounted on a suitable framework and panel board and supplied with fuel piping from fuel tank to Engine.
• Air intake measurement & heat carried away by exhaust gas
• Consisting of an air tank mounted on an iron stand fitted with a suitable orifice plate, manometer, Thermocouple for measuring the exhaust gas temperature with pocket connection with instruments suitably mounted on a panel board.

 

Heat carried away by cooling water:

• Consists of suitable inlet and outlet piping with flow control valve.
• Rota meter to measure the rate of flow of cooling water and Thermocouple with pocket connections for measuring inlet and outlet water temperature.

 

Engine:

• Single Cylinder
• Four Stroke
• Water Cooled Vertical
• Diesel Engine to develop 5 HP @ 1500 RPM.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

The apparatus consists of two floor-standing interconnected rigid vessels, one equipped for operation under pressure and the second under vacuum. An electrically operated air pump connected to the top of the vessels, together with valves and tappings enables the appropriate vessel to be pressurised or evacuated as required to suit the teaching exercise. The vessels can be used independently or together to enable different thermodynamic processes to be evaluated. A pressure sensor connected to each vessel and a temperature sensor inside each vessel permit the changes in the properties of the air contained within the vessels to be monitored continuously.SpecificationA small-scale unit designed to introduce students to the properties of a perfect gas using air to demonstrate basic thermodynamic processesThe hardware consists of two floor-standing interconnected rigid vessels, one equipped for operation under pressure and the second under vacuum. Appropriate valves and tappings are fitted to enable different thermodynamic processes to be evaluated. An electric air pump is supplied to enable pressurisation or evacuation of the vessels as required for the different exercises. Each vessel incorporates a fast response thermistor sensor to monitor the temperature of the air and connection to a piezoelectric pressure sensorAll power supplies, signal conditioning circuitry etc, are contained in a simple electrical console with appropriate current protection devices and an RCD for operator protection. Readings from the pressure sensors and thermistors are displayed on a common digital meter with selector switch. A port on the console can be used to connect to a PC using an optional interface device included with the educational software package. Alternatively the signals can be connected to a user-supplied chart recorder.

Additional Information:

• Item Code: DITD005
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 90-120 DAYS
• Packaging Details: Export worthy

Product Details:

We are the leading manufacturer and exporter of Petrol Engine Test Rig. These highly appreciated Petrol Engine Test Rigs are manufactured with high quality raw materials that are procured from only the best suppliers. Our range of Petrol Engine Test Rigs has a 4 stroke cylinder and is highly demanded for its high performance and efficiency. These Petrol Engine Test Rigs are also available in petrol engine with 2KVA capacity alternator.

Specification:

• Speed: 3000RPM
• BHP: 2,5kwt
• Bore: 70mm

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Sea / Air Basis
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

A benchtop unit comprising a simple Deadweight Pressure Calibrator with weights to generate a range of predetermined pressures. This is connected to a Bourdon gauge and electronic pressure sensor. The Bourdon gauge incorporates an arbitrary scale in addition to the pressure scale and a clear acrylic front face enables observation of the Bourdon tube and the operating mechanism. A reservoir with isolating valve enables the calibrator, Bourdon gauge and pressure sensor to be easily primed. An electrical console houses the necessary electronics with current protection devices and an RCD for operator protection. A digital meter with selector switch displays the output from the pressure sensor, as well as the conditioned reading in engineering units. Corresponding signals are routed to an I/O port for connection to a PC. An optional interface device with educational software package is available.

Product Details: 

• A bench top unit designed to introduce students to pressure, pressure scales and common devices available to measure pressure.
• The equipment utilises a dead weight pressure calibrator DPC to generate a number of predetermined pressures.
• This is connected to a Bourdon gauge and electronic pressure sensor to enable their characteristics, including accuracy and linearity, to be determined.
• The DPC consists of a precision ground piston and cylinder with a set of weights giving an operating range of 20 kNm-2 to 200 kNm-2.
• The bourdon gauge and pressure sensor are mounted on a manifold block with a separate reservoir to contain the hydraulic fluid water for safety and ease of use.
• Valves enable easy priming, restricted flow of water to demonstrate the application of damping and the connection of alternative devices for calibration.

Additional Information:

• Item Code: DITD002
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

The essential component of the apparatus is a large, stainless steel duct which is supplied with air from a small blower via a set of damping filters. The air flow can be varied by regulating the butterfly valve situated at the blower outlet, and the flow rate calculated from the pressure drop across the blower inlet orifice as measured by the sloping manometer mounted against the back of the bench. A window is provided in the air duct to enable the various readings to be taken without disturbing the conditions inside. Instrumentation consists of two screen-type wet and dry bulb hygrometers, one giving a digital readout by means of thermistor probes and the other giving a direct readout via a glass thermometer. A further wet and dry bulb hygrometer of the aspirated type is provided in which the inclusion of an integral blower affords constant air velocity across the bulb. A sling hygrometer is included, to demonstrate a further, simple method of ventilation of the wet and dry bulb type. Finally, there are two further types of hygrometers included with the apparatus, the first being a hair hygrometer seen through the window and the second one being a Vaisala capacitance type instrument with digital readout shown on top of the bench. Humidity bench comprising large stainless steel air duct fitted with single phase blower complete with damping filters and butterfly valve on the blower outlet and a 0 to 75 mm inclined water gauge. Instruments include two screen type wet and dry bulb hygrometers one with digital readout from thermistor probes and one with direct readout from a glass thermometer, an aspirated hygrometer with integral blower, a sling hygrometer, a hair hygrometer and a Vaisala capacitance type within a bench mounted trolley.

Additional Information:

• Item Code: DITD009
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Sea/Air Basis
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

Unit Gas turbines are becoming increasingly used as power plants for a wide variety of applications around the world. Originally they were developed solely for aircraft propulsion where their inherent low specific weight (i.e. mass/unit power) made them essential for high speed flight. For this particular purpose they have been developed to a high degree of efficiency both thermodynamically and mechanically.

 

Features:

• Self-contained complete teaching facility
• Designed for safe easy operation with low noise levels
• Data logging option available for all measured variables
• Comprehensive controls and instrumentation displayed in multi-colour flow diagram

Allows an extensive programme of experiments in Gas Turbine technology including:

• Performance of a simulated single shaft unit
• Performance of a single shaft unit with nozzle simulated load
• Performance of a two shaft unit
• Characteristics of individual components
• Gas generator compressor
• Combustion chamber characteristics
• Power turbine characteristics
• Gas Generator Turbine Efficiency
• Overall Plant Efficiency

 

Additional Information:

• Item Code: DIGTCM001
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Sea/ Air Basis
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

Separating and Throttling Steam Bench consists of a sturdy framework and panels of all steel construction, fitted with a student work surface, interconnecting back panel and adjustable feet. The steam bench includes an insulated separating calorimeter, equipped with a water level sight glass, connected via fixed orifice to a lagged throttling calorimeter which exhausts to a water cooled steam condenser. A manometer is provided for measuring the pressure inside the throttling calorimeter and thermocouples are provided for measuring steam supply and temperatures which may be individually selected for display on an analogue temperature meter. Steam bench designed for determining the dryness fraction of steam. The bench includes series connected mild steel separating and throttling calorimeters, each welded in accordance with designed for a maximum working pressure of 10.34 bar and a maximum steam temperature of 235°C, and lagged with fibreglass insulation enclosed within a mild steel cover. The separating calorimeter is fitted with a graduated level gauge, protected by a clear Perspex tubular shield, and a drain line with isolating valve; the throttling calorimeter is fitted with brass orifice block, a temperature measuring point, a pressure measuring point connected to a manometer via an isolating valve, and a steam outlet line to a steam condenser with cooling water supplied from the service line, via an isolating valve, and connected to drain via a combined sight glass and check valve. Steam is supplied to the separating calorimeter from a fully insulated steam header via a steam control valve; the steam supply line having temperature and pressure measuring point fittings. Steam supply pressure is indicated on a 0???16 bar Bourdon type pressure gauge and analogue indications of temperatures are provided by a 0???250°C meter connected via toggle switch to type K thermocouples fitted at the temperature measuring points.

Experimental Capability of Separating and Throttling Calorimeter Bench:

• To determine the dryness fraction of steam i.e.
• The quantity of dry vapour present in any wet vapour mixture

Additional Information:

• Item Code: DISP006
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

Other Details:

• A bench top unit comprising a hypsometer/hot water bath and ice flask, which generate accurate fixed points and variable temperatures.
• An accurate platinum resistance thermometer with five point NAMAS calibration certificate and temperature indicated directly in deg C is included for reference.

Product Details:

• A bench top unit designed to introduce students to temperature, temperature scales and commonly available devices to measure temperature
• The equipment comprises a hypsometer/hot water bath and ice flask to generate accurate fixed points (the condensation point and triple point of water) and variable temperatures.
• Temperature sensors with different thermometric principles and characteristics are supplied.
• An accurate platinum resistance thermometer with five point NAMAS calibration certificate and temperature indicated directly in deg C, is included for reference.
• The temperature of the condensing water vapour in the hypsometer can be determined accurately using the software or tables in the manual, providing knowledge of the barometric pressure is known.
• The water level is simply raised to change the hypsometer into a variable temperature water bath

Additional Information:

• Item Code: DITD001
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 90-120 days
• Packaging Details: Export Worthy

Product Details:

Features:

• Laboratory-sized steam power plant
• Oil-fired steam generator with electric superheater
• Single-stage axial turbine with curtis wheel, vacuum or exhaust operation
• Dc generator as turbine load
• Water-cooled condenser
• Feedwater treatmen

Technical Data:

• Steam generator
• Steam output: 200kg/h at 11bar
• Max. Fuel consumption: 12L/h
• Heat-up time: 8min
• Max. pressure: 13bar

Super heater:

• Power: 7kw
• Single-Stage Axial Turbine With Curtis Wheel And Hydraulic Speed Regulator
• Power: max. 1,5kW at 3000min-1

Water-Cooled Condenser:

• Cooling capacity: 98kw
• Transfer surface: 2,5m²

Measuring Ranges:

• Temperature: 9x 0...400°c, 2x 0...100°c
• Cooling water flow rate: 0...167l/min
• Pressure: 3x 0...16bar, 1x -1...1bar
• Torque: 0...20nm
• Speed: 0...4000min-1

Additional Information:

• Item Code: DITE024A
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Sea / Air Basis
• Delivery Time: 90-120 Days
• Packaging Details: Export Worthy